This presentation will assess the design approaches covered in NFPA 30 and the challenges associated with protecting flammable liquids. It will also explore how these designs compare to the extra hazard design scheme in NFPA 13. At the conclusion, attendees should be familiar with the NFPA 30 design schemes and how these designs help overcome […]

Join our webinar to learn how to understand sprinkler hydraulic calculation sheets, including common notations, pinch points, and basic calculations. The webinar will break down the key information needed in these sheets and explain the equations used to find it. It also explore important areas to focus on when reviewing hydraulic calculations. Registration ends 4/9/2024 […]

What is an alternate power supply for a fire pump system and when is it required is often misunderstood for a fire pump system. Key questions will be discussed so this issue does not cause surprises to the contractor. Registration closes 4/23/2024 at midnight.   Learn More and Register

This presentation will discuss the similarities and differences between the three sprinkler installation standards. Specific areas of interest include scope and purpose, allowable materials, water supplies, listing requirements, sprinkler types, and design approaches. Knowing these differences could prevent a costly mistake. Registration closes 4/30/2024 at midnight.   Learn More and Register

The 2025 edition of NFPA 13 is currently out for public comment and this webinar will review the changes that can be found in the first draft report as well as topics from the public input stage that can be brought back up for discussion. This webinar will specifically discuss first revisions that were made […]

This presentation will review the requirements for testing sprinklers in NFPA 25. Specific topics will include the testing interval required based on the sprinkler type and installation environment, selection of representative samples, additional requirements for concealed sprinklers and sprinkler guards. Additionally, this presentation will discuss proposed changes to the latest edition of NFPA 25 and […]

NFPA 20 has requirements for power for pumps, drivers, and controllers. While the choice of the power type might be decided by other, the sprinkler contractor and the AHJ need to know the difference between the type as it can change requirements. Discovering these differences later in the project can be costly in terms of […]

Acceptance testing is critically important for new or modified water-based fire protection systems. This webinar will review the acceptance testing requirements for sprinklers, standpipes, fire pumps, and private fire service mains. It will also elaborate on the importance of the test results and how the information is used initially as well as throughout the lifetime […]

Inspection and service groups have gone from being almost an afterthought to becoming a valuable resource for a fire protection company. In this webinar, we will discuss why inspection and service groups bring value to your firm.  Best practices of some of the most successful service organizations will be discussed, as well as how to […]

This presentation will review the requirements for commodity classification in NFPA 13. This presentation will guide participants through the process of classifying commodities based on the composition of the unit load as well as discuss who is ultimately responsible for classifying commodities.   Learn More and Register

This presentation will discuss how AHJs can enforce the requirements of NFPA 25. NFPA 25, Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems. While NFPA 25 provides the required tasks and frequencies to perform ITM activities, enforcement lies within the fire code. This presentation will describe the differences in scope between […]